Non-shrink mortar Product List and Ranking from 24 Manufacturers, Suppliers and Companies

Special mortar plaster finishing material "MORART"

An artistic mortar that redefines the common sense of plastering and paves the way for the future.

"MORART" is a new building material that features a delicate expression and wall texture that does not depend on the substrate or the space. The world expressed through plaster extends from walls to ceilings and even to floors, transforming spaces such as washbasins, shower booths, and bathrooms into realms of art. Moreover, it is possible to beautifully reinvent even the furniture and fixtures that are essential for composing a space. 【Features】 ■ Combines beauty and diversity ■ Does not depend on substrate or space ■ Plaster wall ■ [F☆☆☆☆] certification obtained ■ Fire-resistant material certified by the Ministry of Land, Infrastructure, Transport and Tourism ■ Products from responsible and certified construction companies *For more details, please refer to the PDF materials or feel free to contact us.

Company：フッコー
Price：Other

Interior coating materials
Interior and exterior wall coating materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar for grout "Galva Plug GS" - shrinkage reduction type

This is a premixed non-shrink mortar that reduces cracking due to shrinkage after formwork removal and can be used in a wider range of applications than conventional products.

Galva Plug GS" is a non-shrink mortar designed to reduce shrinkage cracking by incorporating special fibers. It focuses on minimizing cracks caused by shrinkage after formwork removal compared to general non-shrink mortars, making it a pre-mixed product that can be used in a wider range of applications than conventional products. Additionally, it is a specified material for the sacrificial anode "Galva Shield Method.

Company：クリディエンス
Price：Other

grout
Reinforcement and repair materials
Premixed mortar
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-separating high fluidity non-shrink mortar Max AZ

High-performance, multifunctional premixed filling material with a water-to-air strength ratio of 90% or more.

Max AZ, a non-separating high-flow mortar for underwater use, is a high-performance and multifunctional filling material newly developed to meet the demand for high-performance fillers in both civil engineering and construction due to the renewal of existing structures and the diversity of structures. Max AZ features properties such as minimal strength reduction during underwater placement due to a special thickening agent based on surfactants, low water turbidity during underwater placement, and high fluidity while maintaining non-separating characteristics underwater. The successful powdering of the high-performance special thickening agent has resulted in a mortar that is premixed with all materials except water, allowing for easy construction of high-performance mortar simply by mixing with the specified amount of water. For more details, please contact us or refer to the catalog.

Company：ファテック
Price：Other

others
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar High-spec mortar

High-speed rigid premixed resin mortar for concrete repair material

Non-shrink mortar: The high-spec mortar comes with a ready-to-use mixing liquid, eliminating the need for water on site. By using acrylic cationic resin, it offers excellent chemical resistance and weather resistance. It has no shrinkage and high strength (over 70N/mm² at 28 days). The acrylic cationic resin in the mixing liquid strongly adheres to the substrate. Traffic can be opened 15 to 40 minutes after application. For more details, please contact us or refer to the catalog.

Company：マノール
Price：Other

Reinforcement and repair materials
Dam construction
Parking lot facility construction
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super fast hard non-shrink mortar Tight Graster (for trowel application)

Emergency repair and renovation work! Ideal for speedy construction and shortened construction periods! Ultra-fast hardening non-shrink mortar.

Non-shrink mortar Tight Graster (for trowel application) hardens in 20 minutes and reaches practical strength in 60 minutes. It achieves high strength of over 55 N/mm² at 28 days. It has no shrinkage, excellent workability, and allows for speedy construction. It is ideal for repairing existing concrete floors, various foundations, and substrate adjustments. For more details, please contact us or refer to the catalog.

Company：マノール
Price：Other

Plastering base material
Reinforcement and repair materials
Plastering and painting work
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cement-based non-shrink mortar "Pacific Preurox"

Just mix with the specified amount of water on-site! You will obtain high-quality non-shrink mortar.

"Pacific Pre-Eurox" is a cement-based non-shrink mortar suitable for filling gaps between concrete structures and voids in steel structures. Being a premixed type, it consistently provides uniform quality and performance, demonstrating superior fluidity compared to ordinary mortar, allowing for smooth filling of voids. Additionally, it is non-bleeding and exhibits non-shrink properties under restrained conditions due to the action of a properly proportioned lime-based expansion agent. 【Features】 ■ Premixed type ■ High fluidity ■ Non-shrink ■ Early strength and high strength ■ Excellent workability ■ Heat resistance and seawater resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Premixed mortar
Reinforcement and repair materials
grout
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar Pacific Preurox AS (NETIS)

Densification due to the action of special admixtures containing aluminosilicate! Salt resistance is significantly improved!

"Pacific Pre-Eurox AS" is a non-shrink mortar that densifies its structure by pre-mixing aluminosilicate admixtures and fine blast furnace slag powder, effectively suppressing the penetration of deterioration factors (such as salt and moisture) related to embedded rebar. It is particularly suitable for use in coastal areas where measures against salt damage, such as airborne salt and snow melting agent application, are required. Thanks to the action of a non-breeding and appropriately blended lime-based (main component: calcium oxide) expansion agent, it exhibits non-shrink properties under restrained conditions. 【Features】 ■ Densified by the action of a special admixture containing aluminosilicate, it demonstrates high salt resistance while being non-polymer. ■ Like conventional non-shrink mortars, it is easy to pour and pump. ■ The action of a non-breeding and appropriately blended lime-based (main component: calcium oxide) expansion agent allows for non-shrink properties under restrained conditions. ■ After curing, it shows stable strength development from early to long-term. Registered product in the Ministry of Land, Infrastructure, Transport and Tourism's New Technology Information Provision System (NETIS) Registration Number: KK-230051-A *For more details, please refer to the PDF document or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Premixed mortar
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cement-based non-shrink mortar Taiheiyo Preurox M

It can be used in relatively thick areas of large components! It demonstrates sufficient strength over both short and long terms.

"Pacific Pre-Eurox M" is a low heat generation cement-based non-shrink mortar that is mixed with binder (cement + special admixture) and fine aggregate in an approximate weight ratio of 1:2. Due to the low temperature rise associated with hydration, it is suitable for filling in areas where the thickness of the member is relatively large or where the construction cross-section is significant, as it can reduce thermal stress. Additionally, it can be mixed using machines such as hand mixers and can be pumped with a mortar pump. 【Features】 ■ Low heat generation ■ Premixed type ■ High fluidity ■ Non-shrink ■ Early strength and high strength ■ Excellent workability *For more details, please download the PDF or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra high strength, high durability non-shrink mortar Pacific Preurox XS

Ultra high strength, high durability! Self-shrinkage and drying shrinkage are extremely small, which can suppress the occurrence of cracking.

The "Pacific Pre-Eurox XS" is a groundbreaking non-shrink mortar developed for filling joints in bridge structures, wind power foundations, precast components, etc., which require even higher strength characteristics and durability than standard specifications. It ensures the necessary fluidity and workability on-site even in low and high-temperature environments, and after curing, it demonstrates high strength from the initial stage. Due to its outstanding dimensional stability and fatigue durability, it achieves long-term stability (clearing 7 million cycles of repeated loading). Additionally, it has obtained certification from Vestas, the largest wind turbine manufacturer, as a grout material for onshore wind foundations. 【Features】 ■ High fluidity ■ Ultra-high strength (130N/㎟) ■ Dimensional stability ■ High durability ■ High adhesion *For more details, please download the PDF or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose non-shrink mortar "Filcon R"

Due to the absence of bleeding and settlement, there are no voids left after filling, ensuring reliable load transfer.

It is a non-shrink mortar that develops practical strength within a few days. It has excellent fluidity and can fill complex-shaped voids thoroughly.

Company：住友大阪セメント
Price：Other

Premixed mortar
Plastering and painting work
grout
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crack-reducing fiber-reinforced non-shrink mortar Filcon R-F

Crack-reducing fiber-reinforced non-shrink mortar

Filcon R-F is an extremely low-shrinkage, crack-resistant product that maintains various performance requirements for non-shrink mortar while incorporating pre-mixed nylon fibers. Although it contains pre-mixed nylon fibers, it demonstrates fluidity equivalent to that of conventional non-shrink mortars. Additionally, its strength properties, such as compressive strength, are equal to or greater than those of traditional non-shrink mortars.

Company：住友大阪セメント
Price：Other

Mortar and plaster materials
Premixed mortar
Plastering and painting work
Non-shrink mortar

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tile aggregate-based plaster material - Kawarakabe

This is a plaster finishing material that brings out the charm of simple and warm earth.

Kawarakabe is a genuine plaster wall material that offers moisture control benefits due to the porous nature of tile aggregates, while also providing the rustic texture reminiscent of earthen walls. The unique appearance of the tile aggregates enhances its charm. Additionally, by using recycled tiles, it contributes to the reduction of carbon dioxide (CO2), allowing for CO2 reduction during home construction and renovations. It retains the strength of tiles while offering moderate moisture control and insulation properties, making it a highly stable plaster finish material that is resistant to cracking. It has a tactile quality that invites touch, allowing one to feel the breath of the earth. Being a natural material derived from soil, it is harmless to both people and the environment. 【Features】 - Durable building material made from reused tiles, fired at approximately 1100 to 1300°C - Tile aggregates provide moisture control, improving indoor environments - Low thermal conductivity, excellent insulation, and condensation prevention - Superior abrasion resistance, making it a plaster finish material that is difficult to scratch - Natural material that is harmless to the human body and the environment For more details, please contact us or download the catalog.

Company：エコシステム
Price：Other

Exterior coating materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed rigid non-shrink mortar "Filcon S Super"

Excellent fluidity allows for complete filling of complex shapes and voids, such as those in chiseled concrete!

"Filcon S Super" is a high-speed hardening, non-shrink mortar. Since strength develops within hours, it is suitable for urgent construction under time constraints or while opening to traffic. Additionally, long-term strength is also stably achieved. By mixing within the specified water range, stable non-shrink properties are maintained, allowing for load transfer between structures. 【Features】 ■ Long-term strength is also stably achieved ■ Maintains stable non-shrink properties ■ Excellent fluidity ■ No bleeding occurs at all ■ No worries about leaving voids after filling *For more details, please refer to the PDF materials or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crack-reducing fiber-reinforced non-shrink mortar "Filcon R-F"

Achieves practical strength in just a few days! A special blend of non-shrink mortar mixed with nylon fibers.

"Filcon R-F" is an extremely low shrinkage, crack-resistant product that maintains various performance requirements for non-shrink mortar while incorporating pre-mixed nylon fibers. Although it contains pre-mixed nylon fibers, it demonstrates fluidity equivalent to that of conventional non-shrink mortar. Additionally, its strength properties, such as compressive strength, are equal to or greater than those of conventional non-shrink mortar. 【Features】 ■ Special formulation with pre-mixed nylon fibers ■ Significantly improved crack resistance compared to conventional non-shrink mortar ■ Excellent fluidity, allowing it to fill complex-shaped voids thoroughly ■ No bleeding or settling, ensuring that no voids remain after filling, which allows for reliable load transfer ■ Achieves practical strength within a few days *For more details, please refer to the PDF document or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar "Reflegrout"

It has good fluidity and can be pumped! It is excellent for use in large cross-sections.

"Refregraut" is a non-shrink mortar for large cross-section repairs. It is suitable for repair work on large cross-section components where thermal stress cracking due to cement hydration heat and drying shrinkage cracking are concerns, as well as for filling methods such as formwork injection methods. Compared to commonly used non-shrink mortars, it generates less hydration heat, which helps reduce thermal stress in the placed components. 【Features】 ■ Has good fluidity, allowing for pump delivery, etc. ■ Generates less hydration heat, thus reducing thermal stress in the placed components. ■ Exhibits minimal shrinkage due to drying, making it excellent for use in large cross-sections. ■ Complies with the quality standards of the former Japan Highway Public Corporation for "formwork concrete cross-section repair materials." *For more details, please refer to the PDF materials or feel free to contact us.

Company：竹中産業
Price：Other

Mortar and plaster materials
Premixed mortar
Reinforcement and repair materials
Non-shrink mortar

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink pad material "NB Mortar P15"

It exhibits early strength development, excels in initial strength, and also demonstrates excellent long-term strength.

"NB Mortar P15" is a cement-based pad material that excels in non-breathing properties and shrinkage-free characteristics. It has excellent moldability, allowing it to harden while maintaining the shape as applied. It develops strength quickly, demonstrating excellent initial strength as well as long-term strength. It can be used as a leveling mortar for the installation of steel frames and machinery, as well as for concrete in seismic reinforcement and as a pad material for steel seismic walls. [Features] - Excellent non-breathing properties and shrinkage-free characteristics - Superior moldability, hardening while maintaining the shape as applied - Excellent workability in various aspects, including performance, handling, storage, and construction *For more details, please refer to the PDF document or feel free to contact us.

Company：陽光物産
Price：Other

Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar "Denka High Precast Con TYPE-H"

Just add the specified amount of water and mix it to create a non-shrink mortar with excellent fluidity!

"The Denka High-Precast Mortar TYPE-H" becomes a flowable, non-shrink mortar simply by adding the specified amount of water and mixing it. It is an ultra-rapid hardening type, excelling in short-term strength development, achieving a compressive strength of over 24 N/mm² in just 3 hours. Furthermore, it also demonstrates excellent long-term strength, reaching over 45 N/mm² in compressive strength after 28 days. There is no bleeding phenomenon that can lead to void formation. Additionally, the non-shrink components prevent settling and shrinkage. 【Features】 ■ Ultra-rapid hardening type ■ Excellent long-term strength ■ No bleeding phenomenon *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：日之出水道機器道路橋梁マーケティンググループ
Price：Other

Bridge Construction
others
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cement-based non-shrink mortar "DS Masumoru"

It is non-breeding and has an almost zero expansion and contraction rate! After filling, it can be integrated with the structure.

"DS Masumoru" is a cement-based non-shrink mortar that experiences minimal shrinkage due to drying and is less prone to cracking after demolding. It has high fluidity and excellent self-leveling properties, allowing for easy filling of gaps. Despite being of low exothermic type, it demonstrates stable strength development. Additionally, it is non-bleeding and has an almost zero expansion and contraction rate, enabling integration with structures after filling. 【Features】 ■ Premixed type ■ Low heat generation ■ Low drying shrinkage ■ Suppresses temperature cracking during construction ■ Minimal shrinkage due to drying *For more details, please refer to the PDF document or feel free to contact us.

Company：トーテク
Price：Other

Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Salt penetration resistant non-shrink mortar "Pacific Preurox AS"

The densification can be achieved by the action of special admixtures such as aluminosilicate-based admixtures!

"Pacific Pre-Eurox AS" is a non-shrink mortar based on a general-purpose non-shrink mortar, which enhances its density and improves salt resistance by pre-mixing aluminosilicate-based admixtures and fine blast furnace slag powder. It is particularly suitable for use in coastal areas where measures against salt damage are required, such as exposure to airborne salt and the application of de-icing agents. Furthermore, its physical properties meet the standards for non-shrink mortars as described in the construction management guidelines of the East, Central, and West Japan Expressway companies. 【Features】 ■ Suppression of salt penetration ■ Non-shrink ■ Flowability and strength development ■ Quality stability *For more details, please refer to the PDF document or feel free to contact us.

Company：オリエンタル白石本社
Price：Other

Mortar and plaster materials
Premixed mortar
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cement-based non-shrink mortar "DS Masumoru"

Despite low expression levels, stable strength expression. Capable of suppressing temperature cracking during the construction phase.

"DS Mass Mortar" is a cement-based non-shrink mortar that is non-breeding and has an almost zero expansion and contraction rate (no hydration shrinkage), allowing for integration with structures after filling. It reduces temperature stress in components, thereby suppressing temperature cracking during the construction phase. Additionally, it has minimal shrinkage due to drying, making it less likely to develop cracks after demolding. 【Features】 ■ Low heat generation ■ Low drying shrinkage ■ Non-shrink ■ High fluidity ■ Strength development *For more details, please refer to the PDF materials or feel free to contact us.

Company：ドライテック本社工場
Price：Other

Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Batch input amount of cement-based on-site mixing materials ◆ List of applicable mixer models

A compatibility chart for 12 manufacturers and 49 products of on-site mixed grout mortar materials by mixer type has been completed!

No more hesitation! The amount of materials for on-site mixing in one batch is listed by manufacturer and model! ■ Listed Materials - Premixed non-shrink grout mortar, cement-based non-shrink mortar - Wet fireproof spray material, spray fireproof coating material - Air mortar, void filling material - Semi-flexible pavement cement milk injection material - Polymer cement-based cross-section repair material, wet spray polymer cement mortar - Premixed PC grout - Tough mortar - Backfill injection material and a total of 49 items ■ Listed Manufacturers in alphabetical order - Ube Industries, Ltd. - SK Kaken Co., Ltd. - Ohashi Chemical Co., Ltd. - Kikusui Chemical Co., Ltd. - Sumitomo Osaka Cement Co., Ltd. - Pacific Materials Co., Ltd. - Chichibu Concrete Industry Co., Ltd. - Denka Company Limited - Tokuyama M-Tech Co., Ltd. - Pozzolis Solutions Co., Ltd. - Maeda Kosen Co., Ltd. - UBE Mitsubishi Cement Corporation A total of 12 companies

Company：岡三機工
Price：Other

grout
Bridge Construction
Renovation and repair methods
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plasterer × Tile Collaboration "HYTEGULA"

A new plastering expression woven from softness and strength.

This is an interior finishing material that creates a "new texture" by merging two traditional earth-based materials: tiles and plaster. By utilizing the uneven texture of the base tiles and applying a scraped plaster finish on top, it enhances the "beauty of nature" by adding shadows created by light and illumination. 【Features】 ■ A new finishing material created by combining creative tiles from Seto with a top layer of Yamanashi's sandy soil. ■ Matches various designs, both Japanese and Western, through a combination of five types of specialized tiles and scraped plaster finishes. ■ A natural material (sandy soil from Yamanashi Prefecture) that excels in moisture regulation and retention.

Company：フッコー
Price：Other

Interior and exterior wall coating materials
Other plastering finishing agents
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar Tight Graster (standard/accelerated)

High-speed hardening, high fluidity, and non-shrinkage. Ideal for rapid construction and shortening construction time.

Non-shrink mortar Tight Graster (standard and accelerated) is an ultra-rapid hardening, high fluidity, non-shrink ultra-rapid hardening mortar. It hardens in 20 to 30 minutes, achieves practical strength in 60 minutes, has no shrinkage, excellent fluidity, and is ideal for speedy construction and shortening construction periods. Available in standard type or accelerated type, in 25kg bags or 5kg bags x 4 per box. For more details, please contact us or refer to the catalog.

Company：マノール
Price：Other

Mortar and plaster materials
Premixed mortar
Plastering and painting work
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-separating water-resistant non-shrink mortar Pacific Preurox LC-MIX

Excellent separation and reduction effect! Minimizes water quality pollution in the construction area.

"Pacific Pre-Eurox LC-MIX" is a product that combines our cement-based non-shrink grout technology with underwater non-segregating admixture technology. As a pre-mixed product, it can be used to obtain a grout mortar with underwater non-segregation simply by mixing it with the specified amount of water on-site. Additionally, since it uses calcium oxide-based expanding agents as a non-shrink base material, stable hardened properties can be expected even when applied underwater. 【Features】 ■ Underwater non-segregation ■ Prevention of water quality pollution ■ Pre-mixed and high fluidity ■ Non-bleeding and non-shrink ■ High strength *For more details, please refer to the PDF document or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Reinforcement and repair materials
grout
Premixed mortar
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Low Carbon" Non-Shrink Mortar Pacific Preurox GX

Low-carbon non-shrink mortar that significantly reduces CO2 emissions.

The "Pacific Pre-Eurox GX" is a low-carbon product that offers performance equivalent to that of conventional general-purpose non-shrink mortars. By utilizing materials adjusted from industrial by-products and special admixtures, it achieves a significant reduction in CO2 emissions of approximately 55% compared to traditional general-purpose non-shrink mortars. Despite being a low-carbon material, it possesses performance equal to or greater than conventional products and can be used in various situations where non-shrink mortar is required. Additionally, by refreshing the materials used, it has improved low heat generation compared to conventional products, as well as enhanced durability in various aspects, including salt resistance. Thanks to the action of non-bleeding and appropriately blended calcium oxide-based expanding agents, integration with components can be achieved under restrained conditions. 【Features】 ■ Stable quality and performance ■ Excellent workability and improved working environment ■ Integration with components ■ High strength development *For more details, please refer to the PDF document or feel free to contact us.

Company：太平洋マテリアル
Price：Other

Mortar and plaster materials
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Eco-friendly 'Eco Grout' that is low-carbon and considerate of the environment.

A pre-mixed material (pre-mixed mortar) that can achieve the specified strength simply by adding water and mixing on-site.

Stable strength can be achieved regardless of the operator's skill level, contributing to quality control. Features: 1. Low carbon and environmentally friendly By incorporating fly ash from coal-fired power generation instead of Portland cement as a material, CO² emissions are reduced by 30%. 2. Formaldehyde emission grade F☆☆☆☆ As a product registered with formaldehyde emission grade F☆☆☆☆, it can be safely used indoors. 3. Non-bleeding and non-shrinkage By incorporating special expansion materials, it is non-bleeding and non-shrinkage, preventing the occurrence of voids after curing. 4. High fluidity It has excellent fluidity, allowing it to fill every corner. 5. Non-metallic aggregate Since non-metallic aggregates are used, there is no risk of rust formation. 6. Premixed type By simply mixing with the specified amount of water on-site, a stable quality non-shrink mortar can be obtained.

Company：太陽エコブロックス本社　企画室
Price：Other

grout
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed curing type non-shrink mortar "Filcon S Super"

It has excellent fluidity and can fill complex shapes and voids, such as those in chiseled concrete, thoroughly.

It is a high-speed, rigid, non-shrink mortar that develops strength within hours, making it ideal for urgent construction under time constraints or while traffic is open. Additionally, long-term strength is also consistently achieved.

Company：住友大阪セメント
Price：Other

Premixed mortar
Plastering and painting work
grout
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water and heat suppressing type non-shrink mortar "Filcon TF"

Since the temperature stress of the material decreases, temperature cracking is suppressed.

Filcon TF is a non-shrink mortar with hydration heat suppression. It is ideal for pouring large member cross-sections where temperature stress cracking due to hydration heat of cement is a concern, as well as for pouring in hot weather.

Company：住友大阪セメント
Price：Other

Premixed mortar
Plastering and painting work
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-speed rigid non-shrink mortar NEW Filcon M

Emergency construction, requiring early traffic opening for manhole raising. NEW Filcon M.

Ultra-fast hardening non-shrink mortar NEW Filcon M is an ultra-fast hardening non-shrink mortar that achieves practical strength in a short time. It has excellent fluidity, allowing it to reach narrow spaces and fill them reliably. Since there is no bleeding at all, there is no worry about leaving voids after filling. For more details, please contact us or refer to the catalog.

Company：住友大阪セメント
Price：Other

Premixed mortar
Manhole body
Plastering and painting work
Non-shrink mortar

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-shrink mortar Product List and Ranking from 24 Manufacturers, Suppliers and Companies | IPROS

Non-shrink mortar Manufacturer, Suppliers and Company Rankings

Non-shrink mortar Product ranking